background image

Warranty
Verification

Registering your product within

10 days confirms your right to max-

imum protection under the

terms and conditions of your

PHILIPS MAGNAVOX warranty.

Owner
Confirmation

Your completed Warranty

Registration Card serves as

verification of ownership in the

event of product theft or loss.

Model
Registration

Returning your Warranty

Registration Card right away guar-

antees you’ll receive all the informa-

tion and special offers which you

qualify for as the owner of your

model.

Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges
of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration
Card enclosed with your purchase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

For Customer Use

Enter below the Serial No.
which is located on the rear
of the cabinet. Retain this
information for future refer-
ence.

Model No. ______________
Serial No. ______________

Congratulations on your purchase, and
welcome to the “family!”

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX. You’ve
selected one of the best-built, best-backed products available
today. And we’ll do everything in our power to keep you happy
with your purchase for many years to come. 
As a member of the PHILIPS MAGNAVOX “family,” you’re enti-
tled to protection by one of the most comprehensive warranties
and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the infor-
mation and special offers for which you qualify, plus easy access to
accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in
a PHILIPS MAGNAVOX product.

Sincerely, 

Robert Minkhorst 
President and Chief Executive Officer

P.S.  Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!

Know these

safety

symbols

This “bolt of lightning” indicates
uninsulated material within

your unit may cause an electrical shock.
For the safety of everyone in your
household, please do not remove prod-
uct covering.

The “exclamation point” calls
attention to features for which

you should read the enclosed literature
closely to prevent operating and main-
tenance problems.

WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.

CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.

ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus
large de la fiche dans la borne corre-
spondante de la prise et pousser
jusqu’au fond.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

R

E

G

I S

T R

A T I O N

N

E

E

D

E

D

W

IT

HI

N

10

D

A

Y

S

Hurry!

Visit our World Wide Web Site at http://www.philipsmagnavox.com

Summary of Contents for VRA451





























































Reviews: