Philips VR720/58, User Manual

Page: 59 / 64

55
Automatic switch@off
If you haven't used the video recorder for a few minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel this function to use the video recorder as a
television receiver.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control. The main menu will appear.
3
Select line '
AUTO STANDBY
' using P
r=
or
;q
P .
4
Select '
OFF
' (no automatic switch-off) or '
ON
' (automatic switch-off)
with the menu buttons
P
or
Q
.
5
Confirm with OK . '
STORED
' will briefly appear on the TV screen.
6
To end, press MENU .
Using your video recorder remote control
with your TV set
With the enclosed multicode remote control you can control the main functions of your TV set.
To do this, you must first enter a code number that corresponds to the make of your TV set.
You will find a summary of all available remote control commands on the last page of this
manual.
1
Hold down the
Sr
button.
2
Using the number buttons 0-9 , enter the code number that
corresponds to the make (manufacturer) of your TV set.
When you have entered the code number correctly, the TV set will
switch off.
a
My TV set will not switch off
b
Also try to enter code numbers of other manufacturers.
b
In some cases, it is possible that your TV set will not react to the selected
code numbers. If this is the case, you unfortunately cannot use this
function.
ENGLISH
Other functions