Philips VR20D/07, User Manual

Page: 13 / 43

50
EN
MODE SET
DSPC ON
O. S. D. ON
DIRECT RECORD ON
AUTO SP
=
LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
AV2 SELECT Setting
Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER
connector of this recorder.
1
Press MENU to access the Main Menu screen.
2
Press
%fi
to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3
Press
%fi
to move the highlight bar (pointer) to "AV2 SELECT".
4
Press OK or
#
to select "AV2", "DECODER" or "SAT".
a– AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite tuner connected to the
AV2 IN/DECODER connector.
b– DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
If "AV1 SELECT" is set to "S-VIDEO" and "AV2 SELECT" is changed to
"DECODER", "AV1 SELECT" will be changed to "VIDEO" automatically.
c– SAT : To view a satellite programme with the TV set while the recorder is in
Timer mode, in Stop mode, recording or turned off. (
Z
pg. 53)
5
Press MENU to return to normal screen.
●
If you have a satellite tuner or a decoder connected to the AV2 IN/DECODER connector, be
sure to set "AV2 SELECT" back to appropriate mode after editing.
●
If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT"
set to "AV2".
●
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut
or because the AC was removed from the recorder, "AV2" will be automatically selected when
the power is restored to the recorder. If you are using a satellite tuner or a decoder, be sure to
set "AV2 SELECT" back to appropriate mode.
●
If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT"
to "DECODER".
EDITING (cont.)
PREVIOUS PAGE
AV1 SELECT VIDEO
AV2 SELECT AV2
DV SOUND SOUND1
AUDIO REC NICAM
[
5∞
]
=
[MENU] : EXIT
MODE SET
DSPC ON
O. S. D. ON
DIRECT RECORD ON
AUTO SP
=
LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
AV1 SELECT Setting
Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of
this recorder.
1
Press MENU to access the Main Menu screen.
2
Press
%fi
to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3
Press
%fi
to move the highlight bar (pointer) to "AV1 SELECT".
4
Press OK or
#
to select "VIDEO" or "S-VIDEO".
a– VIDEO : If a connected device's output is compatible only with regular video signals,
set "AV1 SELECT" to "VIDEO".
b– S-VIDEO : If a connected device's output is compatible with Y/C signals, set "AV1
SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
quality S-VHS pictures.
5
Press MENU to return to normal screen.
●
If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".
PREVIOUS PAGE
AV1 SELECT
VIDEO
AV2 SELECT AV2
DV SOUND SOUND1
AUDIO REC NICAM
[
5∞
]
=
[MENU] : EXIT