background image

5

EN

2.

2.

Insert one end of the
supplied aerial cable
into the RF OUT at
the back of the video
recorder and the
other end into the
aerial input socket at the back of the TV set.

3.

3.

Plug one end of a
scart cable into the
scart socket TV at
the back of the video
recorder and the
other end into the suitable scart socket on
your TV reserved for the video recorder oper-
ation (see your TV's operating instructions).

4.

4.

Switch on the TV.

5.

5.

Insert AC cable into the wall socket.

6.

6.

If the connection was properly made and
your TV was automatically switched to the
programme number for the scart socket, you
will see the following picture:

Then, read the paragraph 'Preparation for use' in
the chapter 'Installing your video recorder'.

Connecting without a scart cable

Have the following cables ready:
an aerial cable.

1.

1.

Switch off your TV.

2.

2.

Remove the aerial
cable plug from the
aerial input socket of
the TV. Insert it into
the AERIAL at the
back of the video
recorder.

3.

3.

Insert one end of the
supplied aerial cable
into the RF OUT at
the back of the video
recorder and the
other end into the
aerial input socket at the back of the TV.

4.

4.

Insert AC cable into the wall socket.

5.

5.

Switch on your TV and select the programme
number used for video playback on your TV
set (see your TV's operating instructions).

6.

6.

Select this programme number and manually
start the TV's channel search as if you want-
ed to save a new TV channel until the next
screen appears.

I do not see a picture above

* Check the cable connections.
* Repeat the channel search on your TV.

7.

7.

Save this programme number setting on your
TV for video recorder operation.

You can find more details in chapter 'Preparation
for use'.

AERIAL

    RF O

UT

TV

    AERIA

L

RF OUT

    RF OUT

TV

    AERIA

L

Programme number for video recorder oper-
ation

You have now saved a programme number for
use by your video recorder as you would a reg-
ular TV channel. This programme number must
now be used in future for video recorder play-
back ('video recorder' TV channel).

RF OUT

    RF O

UT

TV

    AERIAL

TV

    RF OU

T

 TV

    AERIA

L

My TV has several scart sockets. Which one
should I use?

Select that scart socket which is suited for the
video output as well as for the video input.

My TV offers me a selection menu for the
scart socket.

Select 'TV' as a connection source of this scart
socket.

My screen is empty

Many TVs are switched to the programme num-
ber for the scart socket by way of a control sig-
nal sent through the scart cable.
If the TV does not automatically switch to the
scart socket programme number, manually
change to the corresponding programme num-
ber on your TV (see your TV's operating instruc-
tions).

PLEASE CONNECT AERIAL OR
CABLE TO THE VCR

THEN...

PUSH P+ KEY

OR...

FOR PLAY ONLY - PUSH PLAY

PLEASE CONNECT AERIAL OR
CABLE TO THE VCR

THEN...

PUSH P+ KEY

OR...

FOR PLAY ONLY - PUSH PLAY

VR130/07(EN).QX4  02.4.23  11:17 PM  Page 5

Summary of Contents for VR130/07

















Reviews: