background image

— 3 —

D

ESCRIPTION

 

OF

 

C

ONTROLS

Front Panel

REC/OTR

     MENU

OK/STATUS

S-VHS ET

AUDIO

POWER

COLOUR MODE

VR 1010    6 HEAD HI-FI STEREO 

CHANNEL

PLAY

PAUSE/STILL

STOP/EJECT

+8

4

0

6

-15dB

NORM

SP

OPEN     A/V FRONT CONNECTORS

/

DUBBING

VIDEO CASSETTE RECORDER

TURBO

DRIVE

Super

4

3

6

10

5

2

1

1 1 1

7

VIDEO

L  AUDIO  R

Open the lid.

S-VIDEO

8

9

OPEN     A/V FRONT CONNECTORS

Super

1112

13

14

15 16 17 18

19

1 POWER button

• Turns the VCR on or off.
• Sets the VCR for an unattended

recording (timer recording) after
timer settings are completed. (

P.25,

P.26)

2 S-VHS ET button

Selects S-VHS ET recording mode
when pressed. The lamp (the button
itself) will lit. (

P.19)

3 COLOUR MODE button

Selects the colour mode both for
playback and recording. (

P.12)

4 Cassette compartment

Where a video cassette is inserted.

5 STOP/EJECT 

7

 / 

0

 button

Stops the tape when the tape is running.
(

P.13)

Press again to eject the cassette when
the tape is not running.  (

P.18)

6 Shuttle ring

• Rewinds or fast forwards the tape

when the tape is not running. (

P.20)

• Starts reverse or forward rapid visual

search during playback or still picture
mode. (

P. 13, P.20)

• Changes the setting of a menu item

by turning to the right, or returns to a
previous menu by turning to the left
when using the menus.

13 Display window

See page 6.

14 IR (infrared) remote sensor

Receives the signal from the (IR)
remote control.

15 CHANNEL 

 /

5

 buttons

• Changes the channels on the VCR.

Release at a desired channel.

• Moves the cursor up and down when

using the menus. (

P.10)

• Adjusts the tracking during playback,

still picture and slow motion picture.
(

P.20)

16 REC (record)/OTR 

 button

• Starts recording when pressed once.

(

P.13)

• Starts a recording for 30 minutes to 6

hours long when pressed more than
once. The shut-off time increases in
30-minute intervals. (

P.21)

17 PAUSE/STILL 

8

 button

•   Stops the tape during recording
    (pause) or playback (still picture).
    (

P.13,P.20)

    Press again to resume normal
    recording.
    Press 

PLAY

 

3 to resume normal

    playback.
•   Activates slow motion picture when
    pressed for more than 2 seconds
    during playback. (

P.20)

18 PLAY 

3

 button

Starts normal playback. (

P.13)

19 Jog dial

Advances or reverses the picture frame
by frame in the still picture mode.
(

P.20)

7 S-VIDEO input jack

For connecting to the S-Video
output jack on another VCR or a
camcorder. (

P.27)

8 VIDEO input jack

For connecting to the video output jack
on another VCR or a camcorder.
(

P.27)

9 AUDIO input jacks

For connecting to the audio output jacks
on another VCR or a camcorder.
(

P.27)

10 AUDIO DUBBING button

Replaces the normal audio sound of a
previously recorded tape with a new
soundtrack, using an audio component.
(

P.28)

11 OK/STATUS button

•   Goes to the next item on the VCR
     menu. (

P.10)

•   Displays the time counter, present
     time, channel number, and remaining
     tape length. (

P.21)

12 MENU button

Displays the menu.
Press again to exit from the menu
operations. (

P.10)

vr1010/75

00.6.29, 4:53 PM

3

Summary of Contents for VR1010/75
































Reviews: