background image

— 2 —

Important for the United
Kingdom.

This machine is fitted with an
approved moulded 13 Amp plug. To
change a fuse in this type of plug,
please follow these instructions.

1 Take off the fuse cover and

take out the fuse.

2 Put in a new fuse which

should be a BS1362 3A,
A.S.T.A or BSI approved
type.

3 Refit the fuse cover.

If the plug fitted is not suitable for
your socket, cut it off and fit
another type.

If the plug you fit contains a fuse, it
should be a 3Amp fuse. If you fit a
plug which does not need a fuse,
make sure the fuse on your fuse box
is not greater than 5 Amps.

i Note: Please destroy the plug

you have cut off so that it
cannot be used in a 13 Amp
socket somewhere else.

How to connect a plug

The wires in the lead from the
video recorder are coloured as
follows

.

* Blue - 'neutral' ('N')

* Brown - 'live' ('L')

4 Connect the blue wire to the

terminal in the plug which is
marked with the letter 'N' or
coloured black.

5 Connect the brown wire to

the terminal in the plug
which is marked with the
letter 'L' or coloured red.

6 Do not connect either of the

wires to the terminal in the
plug which is marked with
the letter 'E', the symbol     or
coloured green or green and
yellow.

Before you refit the plug cover,
make sure that the grip at the
bottom of the plug is clamped over
the plastic cover of the lead, not just
over the two wires.

T

ABLE

 

OF

 

C

ONTENTS

Safety Precautions

WARNING: DANGEROUS

VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

• The 

STANDBY/ON and VCR POWER

 buttons do not completely shut off

the mains power from the unit, but switch operating current on or off only.

• The rating plate is on the rear of the unit.

Table of Contents

Some Do's and Dont's............................................................................................. 3
Description of Controls ......................................................................................... 4

Front Panel .................................................................................................. 4
Rear Panel ................................................................................................... 5
On-Screen Display ...................................................................................... 5
Remote Control ........................................................................................... 6
Display Window .......................................................................................... 8

Getting Connected Up ........................................................................................... 9

VCR to TV Connection using the RF Connection ...................................... 9
VCR to AV TV Connection using the SCART Connection ........................ 9
VCR to AV TV Connection using the S-video Connection ...................... 10

Setting Up ............................................................................................................. 11

Auto Set Up/Preset Download .................................................................. 11
Setting the Video Channel ......................................................................... 14
Power Save Mode ..................................................................................... 15
Preset Download ....................................................................................... 15
Auto Channel Setting ................................................................................ 15
Manual Channel Setting ............................................................................ 16
Clock Setting ............................................................................................. 20

VIDEO Plus+

®

 Set Up .............................................................................. 20

Basic Operations .................................................................................................. 21

Playback .................................................................................................... 21
Recording .................................................................................................. 22
Automatic Operations ............................................................................... 22

Advanced Operations .......................................................................................... 23

Special Effect Playbacks ........................................................................... 23
Tracking Adjustments ............................................................................... 23
Index Search .............................................................................................. 23
SmartPicture .............................................................................................. 24
DSPC ........................................................................................................ 24
Digital TBC/NR ........................................................................................ 25
Digital 3R .................................................................................................. 25
Receiving/Recording NICAM Stereo and Bilingual Programmes ........... 25
Selecting Monitor Sound .......................................................................... 25
Using On-Screen Display ......................................................................... 26
One Touch Recording (OTR) .................................................................... 26
Selecting Recording Format ..................................................................... 27
Selecting AV1 and AV2 Input signal ......................................................... 27
Automatic Satellite Programme Recording .............................................. 28
EasyLink Functions .................................................................................. 28
Timer Recording Usi

ng the VIDEO Plus+ System

................................... 29

Timer Recording ....................................................................................... 30
Tape Duplication ....................................................................................... 32
Audio Dubbing ......................................................................................... 33

System Connections ............................................................................................. 34

Connection To a Satellite Tuner (Simple Connections) ............................ 34
Connection To a Satellite Tuner (Perfect Connections) ............................ 34
Connection To a Decoder .......................................................................... 35

Operating TV ....................................................................................................... 36
Before Requesting Service .................................................................................. 37
Specifications ........................................................................................................ 38

VIDEO Plus+

 and PlusCode are registered trade-

marks of Gemstar Development Corporation. The

VIDEO Plus+

 system is manufactured under license

from Gemstar Development Corporation.

Introduction

Congratulations on purchasing your

new VCR.

You can’t wait to get it working, but
before you do, spare a few moments to

read this brief introduction to the world

of video recording. It may repay you
handsomely in terms of improved

results, and avoiding of costly mis-

takes.

625

VR1000/07-New 99.10.15, 5:41 PM

2

Summary of Contents for VR1000/02X






































Reviews: