29
Settings
8.1.4 Setting editing mode
You can edit an existing recording by overwriting a part of it or adding
a new recording at its end. You can use the Overwrite mode to delete
the existing recording from its current position!
1
In stop mode (start-up screen), press
a
/MENU
for at least two
seconds.
2
Press
a
to select the recording settings menu
Ó
.
3
Press
h
/
b
to select the function
Edit mode
.
4
Press the record key,
g
, to confirm.
5
Press
h
/
b
to select if you wish to add a new part to an existing
recording, whether you want to delete a part of an existing
recording and overwrite it, or turn off the function.
X
The selected editing mode icon will be displayed.
Å
– add a recording
Æ
– overwrite a recording
6
Press the record key,
g
, to confirm.
7
Press the
~
key to exit the menu.
Tip
• Press the
~
key to cancel the operation without saving and
return to stop mode.
8.1.5 Enabling/disabling silent recording
Use this function to turn off display indication, LED status, and the
signal tones during a recording. This allows you to record while there is
no visible indication on the display that a recording is being made.
1
In stop mode (start-up screen), press
a
/MENU
for at least two
seconds.
2
Press
a
to select the recording settings menu
Ó
.
3
Press
h
/
b
to select the function
Silent recording
.
4
Press the record key,
g
, to confirm.
5
Press
h
/
b
, to select whether you want to turn the function on
or off.
6
Press the record key,
g
, to confirm.
7
Press the
~
key to exit the menu.
Tip
• Press the
~
key to cancel the operation without saving and
return to stop mode.
