Philips VL3015 Spot Luminaire, User Manual

Page: 32 / 118

VARI
❋
LITE VL3015 / VL3515 S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
1 4 2 7 A u g u s t 2 0 1 3 0 2 . 9 6 7 9 . 0 0 0 2 A
Installation Procedures
Reflector Selection
Users have the option of using one of the two supplied reflectors - one Peaked Reflector (installed in
unit) and one Flat Field Reflector (stored in the luminaire’s head assembly under the bottom head
cover) - with the VL3015 Spot and VL3515 Spot Luminaires. For more information on changing the
reflector, refer to
“Reflector Change” on page 89 of this manual.
Hanging the Luminaire
The VL3015 / VL3515 Spot Luminaire can be hung horizontally or vertically from any structure
designed to work with the type of load created by this moving luminaire. Two mounting bracket
assemblies (provided) are used to attach truss hooks or other mounting hardware as required. Many
compatible truss hooks are available from different manufacturers for your particular needs.
A minimum of one hook per truss hook bracket is required. If mounting method does not use truss
hooks, two attachment points per truss hook bracket are required. When attaching more than one point
on a single bracket, the attach points must be spaced as far apart as possible using the supplied
mounting holes.
Install mounting hardware and brackets:
Step 1. Install truss hooks on two provided truss hook brackets as required.
Figure 2-2: Installing Truss Hooks
Note: Various types of truss hooks can be used. The Mega Claw truss hook (as shown in the example
above) as well as many other standard hooks, can be ordered separately.
Step 2. Determine required configuration of bracket installation. Brackets may be installed in either
orientation as shown.
Figure 2-3: Bracket Orientation Options
Bracket
Example Truss
Hook Installation
Mega Claw Truss Hook
(not provided)
Truss Hook Hardware
(not provided)
Bracket
Bracket