Chapter 3
VSM Pro User Guide 18
Step 3: Connect the Network, Video, and Power Cables
•
Connect a CAT-5e Ethernet cable from the lighting system network to the Ethernet input on
the back of the controller.
•
Connect the source video input cable:.
– If connecting to a digital media source, attach a user-supplied DVI or VGA cable
from the source device to the appropriate port on the back panel of the VSE Pro.
– If working with an analog media source, first attach the provided Composite Video
breakout cable to the Composite port on the back panel of the VSE Pro, then
connect a user-supplied BNC Composite Video cable or S-Video cable to the
appropriate plug on the breakout cable. Note that only the BNC Composite Video
and S-Video plugs on the breakout cable are active.
•
Connect the provided power cable.
VGA In
DVI In
ETHERNET
MASTER
ON / OFF
DVI input
Composite In
ETHERNET
MASTER
ON / OFF
Composite Video input
