Mechanical Instructions
EN 7
4.
4.2.4
Sledge-motor Assy
Caution: Never try to align the DVD-Module! ! ! Only the factory
can do this properly. Service engineers are only allowed to
exchange the sledge motor assy.
Figure 4-3 Sledge-motor assy
1.
Place the DVD-Module, with the laser facing downwards,
on a soft surface.
2.
Remove the three screws [1] that hold the sledge-motor
assy, and lift the assy upwards. You can replace it now.
3.
If necessary, it is now also possible to replace the sledge-
rack [2] that is hinged in the sledge assy.
4.3
Re-assembly
To re-assemble the module, do all processes in reverse order.
Be sure to:
•
Sledge-motor assy: Mesh the teeth of the sledge motor
and sledge rack properly, during mounting of the sledge-
motor assy.
•
DVD-M: Point the laser up (towards the tray), when you
mount the DVD-M in the bracket.
•
Complete module: Place all wires/cables in their original
positions
CL 26532126_014.eps
191102
1
1
2
1
Summary of Contents for VAE8015
Page 5: ...Directions For Use EN 5 VAE8015 8020 3 3 Directions For Use Not applicable ...
Page 14: ...Service Modes Error Codes and Fault Finding EN 14 VAE8015 8020 5 Personal Notes ...
Page 46: ...10 Spare Parts List 10 1 Exploded Views Basic Engine CL 26532126_042 eps 181202 ...
Page 47: ...Loader CL 26532126_043 eps 191202 ...