Philips TT2040, User Manual

Page: 21 / 32

Start with the highest setting (5) to acquire practice with this appliance.
Hair length setting Hair length after trimming
1 3mm
2 5mm
3 7mm
4 9mm
5 11mm
1 Hold the appliance in the trimming position, with the trimming unit
pointing upwards and the shaving unit pointing downwards (Fig. 7).
2 Press the hair length setting selector (1) and then move it up or
down (2) to select a setting (Fig. 8).
The two lines next to the setting selector show which setting you
have selected (Fig. 9).
3 Press the trimming unit on/off button once to switch on the
trimming unit (Fig. 10).
4 To trim the hair, move the trimming comb through the hair
slowly (Fig. 11).
Tips
Always make sure that the tips of the trimming comb point in the
direction in which you move the appliance.
Make sure that the flat part of the trimming comb is always fully in
contact with the skin to obtain an even result.
Since all hair does not grow in the same direction, you need to move
the appliance in different directions (upward, downward or across).
Trimming is easier when the skin and hair are dry.
5 When you are finished, press the trimming unit on/off button again
to switch off the trimming unit (Fig. 10).
-
-
-
-
-
English
0