Philips TT2040, User Manual

Page: 20 / 32

When the appliance is fully charged, it has an operating time of up to 50
minutes.
When the charging light lights up orange, the battery is running low
(approx. 10 minutes of operating time left) and you need to recharge the
appliance.
Note: The appliance can only be charged in the charger.
1 Switch off the appliance before you charge it.
2 Insert the small plug into the charger (Fig. 3).
Note: The small plug is easiest to insert when the charger is folded.
3 Unfold the charger (‘click’) (Fig. 4).
4 Put the adapter in the wall socket.
5 Put the appliance in the charger (Fig. 5).
The charging light starts to flash green to indicate that the
appliance is charging (Fig. 6).
When the battery is fully charged, the charging light lights up green
continuously.
After approx. 30 minutes the charging light goes out to save energy.
Optimising the lifetime of the rechargeable battery
Discharge the rechargeable battery completely twice a year by letting the
motor run until it stops. Then fully recharge the battery.
Using the appliance
You can use the appliance wet or dry to shave or trim hair on all parts of
the body below the neckline. Do not use this appliance to shave or trim
facial or scalp hair.
Tip: Take your time when you first start to shave sensitive areas. You have to
acquire practice with the appliance. Your skin also needs some time to adjust
to the procedure.
Trimming
The trimming comb allows you to cut hair to 5 different lengths.
,
,
,
English