Mechanical Instructions
EN 10
TES1.0E LA
4.
4.6
Switch board Removal
1.
Remove the rear cover, as described above.
2.
Unplug connector [1].
3.
Unplug flat foil connectors [2].
4.
Carefully remove the tape [3], that fixates the flat foils to the
frame.
5.
Remove fixation screws [4].
6.
Remove the switch board.
Figure 4-6 Switch board removal
4.7
Mains Switch Removal
1.
Remove the rear cover, as described above.
2.
Unplug connectors [1].
3.
Remove screws [2].
4.
Remove screws [3].
5.
Remove the mains switch.
Figure 4-7 Mains switch removal 1/2
Figure 4-8 Mains switch removal 2/2
4.8
Top Control Board (Keyboard) Removal
1.
Remove the mains switch partially, to get access to the
keyboard.
2.
Unplug connector [1].
3.
Remove screws [2].
4.
Pull the keyboard out of the set.
5.
De-solder wires [3].
6.
Remove the keyboard.
Figure 4-9 Keyboard removal 1/2
Figure 4-10 Keyboard removal 2/2
G_16510_021.ep
s
171106
1
3
2
2
4
4
4
G_16510_016.ep
s
171106
2
1
G_16510_017.ep
s
171106
3
G_16510_01
8
.ep
s
171106
2
1
G_16510_019.ep
s
171106
3
