Mechanical Instructions
4.
4.5
Model T315XW01V5
4.5.1
Control Board
Disassembly
1.
Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-27 Control board location
2.
Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-28 Cover screws removal
3.
Lift the cover from the Control board.
Figure 4-29 Lift cover
4.
Remove the fixation screw of the Control board.
Figure 4-30 Fixation screw removal
5.
Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-31 Unplug FPCs
6.
You can now remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the (white) line
must be invisible when inserted correctly (see figure below).
Figure 4-32 Correct FPC insertion
H_16900_002.eps
110707
H_16900_003.eps
110707
H_16900_004.eps
110707
H_16900_026.eps
110707
H_16900_027.eps
110707
H_16900_007.eps
110707
