Philips SRU5100 User Manual Download Page 8

Page: 8 / 23

Troubleshooting

Remote does not operate your product.

• Press the mode button of the product you want to

control.

• Program the remote with a new code.
• Install new batteries. (You might have to reprogram

your remote after installing new batteries.)

• Remote may not be compatible with your product.

Remote does not operate some features of your product.

• Program remote with a new code.
• Remote may not be able to operate all features of

your product or button names might be different
than your product.

Red Indicator blinks after you program a product code.

• Remote did not accept the code.
• Try to program the code again or try a different

code.

For help with setup, please call: 919-573-7853.

The manufacturer warrants that this product shall be free
from defects in material, workmanship and assembly,
under normal use, in accordance with the specifications
and warnings, for as long as you own this product. This
warranty extends only to the original purchaser of the
product, and is nontransferable. Defective products,
together with the dated proof of purchase, must be
returned to the place of purchase for repair or
replacement. THERE ARE NO OTHER EXPRESS
WARRANTIES. Incidental and consequential damages
are disclaimed where permitted by law. This warranty
gives you specific legal rights, and you may also have
other rights which vary from state to state.

Made in China. Quality Assured in USA.
Ledgewood, NJ 07852

Limited Lifetime Warranty

Any Mode chosen for Volume/Mute control MUST have
its own Volume/Mute function or the Volume/Mute
buttons will do nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to
any one chosen Mode for Volume/Mute button control
without the needing to change to that Mode.

1. Press and hold the

CODE SEARCH

button until the

red indicator turns on, then release the button.

2. Press and hold the

MUTE

button until the red

indicator blinks off, then release the button.

3. Press and release the desired Mode button (

VCR

, etc.) for Volume/Mute control, the red

indicator blinks then stays on.

4. Press and release the

MUTE

button and the red

indicator turns off. The red indicator will blink
rapidly for three seconds if the Mode you have
selected has no Volume/Mute control.

5. All other Modes will now punch-through to your

chosen Mode for Volume/Mute control.

6. All “Visual” and “Audio” programmed Modes will

now punch-through to the respective Modes you
have chosen for Volume/Mute control.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own
Volume/Mute control. Note - If your chosen Mode has
no Volume/Mute functions of its own then the Volume/
Mute buttons will do nothing.

1. Press and hold the

CODE SEARCH

button until the

red indicator turns on, then release the button.

2. Press and hold the

MUTE

button until the red

indicator blinks off, then release the button.

3. Press and release the desired Mode button (

VCR

, etc.), the red indicator blinks then stays on.

4. Press and release the