9
EN
English
2.3.2 Improving keys
When correctly set up, the remote control
should be able to operate all your devices.
However, when using the remote control for the
first time it might occur that some keys do not
yet function as expected. In this case you can
have the remote control search for alternatives.
Note
Improving keys is not possible when the code
was found during full database search (with
code ‘9, 9, 9, 9’).
Duringinitialsetup
1
Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2
Press the key that does not function, keep it
pressed and
immediately
release it when the
device responds. Repeat this for every key
that does not function.
• If the key still does not function as expected,
try pressing it again for a longer period of
time.
Afterinitialsetup
1
Make sure the receiving device is able to
respond.
E.g. when you try to repair the Play key for
your DVD player, make sure to insert a DVD
into the DVD player otherwise the Play key
is not able to function.
2
Select the device
that you wish to
operate (e.g. DVD).
Press the
device
selection key to
select DVD.
3
Keep keys
and
pressed
simultaneouslyfor
5seconds
.
• The red Setup
light lights
up. The remote control is now in setup
mode.
4
Pressandhold
the key that does not
function and
immediately
release it when
the device responds.
• If the key still does not function as expected,
try pressing it again for a longer period of
time.
5
Press the
device selection key
twice
to save your
settings and exit
setup mode.
•
When no key
is pressed for 5 minutes or more, the
remote control will exit setup mode,
automatically saving all your settings.
3 Using the universal
remote control
3.1 Keys and functions
The illustration on page 2 gives an overview of
all keys on the remote control. Try out the keys
you need for operating your devices.
Notes
•
Keys having the same functions as the
keys on your original remote control may
have different namings on the SRP4004
(e.g. Info / Display).
•
Only functions that are available on your
original remote control can be used for
operating your devices with the SRP4004.
1
.................................... Setup light. Lights up red
when the remote control
is in setup
mode.
2
............................... selects available source
inputs (antenna, cable,
etc.).
3
......... device selection keys.
• select the device to be
operated.
• light up when a remote
control command is
being sent.
Using
the
univ
ersal
remote
contr
ol
2 x
SRP4004_27__Manual_80_210.indd 9
25-09-09 13:19
