© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium)
SRM7500 - Instructions for Use
Selecting Extra Functions
Devices can also have extra functions, that are not covered by the hard
keys on the SRM7500.You can select these extra functions in the display.
1
Press .
Extra functions for the selected device appear in the display.
2
Use the
Cursor Up
key and
Cursor Down
key to scroll through all
extra functions.
3
If you have selected the function you were looking for, press
.
The remote control sends out the IR signal.
For adding extra functions, see chapter
‘Add a Function’
on
page 19
.
Tip
If you cannot find the extra function you are looking for, you can exit the
More menu by pressing
again.
Note
Some devices do not have any extra functions available in the onboard
database. However, you can copy additional functions from your original
remote by learning keys. See ‘Add a Function’ on page 19.
Opening Your PC Media Center
To open your PC Media Center on your PC, press
. The PC Media
Center main menu appears on your PC or TV screen, according to your
configuration.
You browse the content of your PC Media Center with the
cursor
keys
and
OK
key.
To switch back to your PC Media Center again after controlling another
device with your SRM7500, you can:
■
Press
. This will take you back
to the main menu
.
■
Press
repeatedly until the PC icon appears on the remote’s
screen. This will take you
to the state
the PC Media Center was in
before you switched to the other device.
Note
Pressing
enables you to control the
music content
on your PC, while
pressing
enables you to control
all multimedia content
on your PC.
SRM7500 - Instructions for Use
13
