8
Move the joystick to set time and
•
date, and then press
OK
.
Tip
If the PhotoFrame is disconnected from the
•
power supply for a long time, you need set
time and date again after you turn on the
PhotoFrame.
Turn off the PhotoFrame
Note
You can only turn off the PhotoFrame after all
•
copy and save actions are complete.
To turn off the PhotoFrame, press and
•
hold for about 2 seconds.
Transfer your media
Transfer photos with a storage device
Caution
Do not disconnect the storage device from the
•
PhotoFrame during media transfer.
The PhotoFrame supports most types of the
following storage device:
Secure Digital (SD)
•
Secure Digital High Capacity (SDHC)
•
Multimedia Card (MMC)
•
Memory Stick (MS)
•
Memory Stick Pro (MS Pro)
•
Turn on the PhotoFrame
Note
When you connect the PhotoFrame to a
•
power supply, the PhotoFrame turns on
automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, press and
hold to turn on the PhotoFrame.
For the first time you turn on the
PhotoFrame
:
The screen prompts you to select a
•
language.
Select a language, and then press
•
OK
.
The screen prompts you to set time
•
and date.
EN