Philips Sonicare For Kids HX6322/04, Manual

Page: 10 / 204

English
10
Preparing for use
Applying the replaceable panel
The Sonicare For Kids comes with 1 replaceable panel.
1 Remove the adhesive backing from the panel.
2 Apply the panel to the white section on the front of the
handle
(Fig. 2) .
Note: Make sure you line up the cut-out areas on the panel with
the buttons on the front of the handle.
3 Apply your favorite sticker to the panel as shown on the sticker
sheet (Fig. 3) .
Reapplying a panel that has been removed
1 Rinse the panel in warm water; you may also use a mild detergent
to clean it.
2 Let the panel air dry.
3 Reapply the panel to the white section on the front of the handle.
Attaching the brush head
1 Align the brush head so the bristles point in the same direction as
the front of the handle (Fig. 4) .
2 Firmly press the brush head down onto the metal shaft until it
stops.
Note: There is a small gap between the brush head and the
handle.
4235_020_9981_2_DFU-Simple_A6_v7.indd 10 11/04/16 11:46