Philips Sonicare For Kids HX6321/03, Manual

Page: 12 / 120

Charging your Sonicare
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger (Fig. 5).
The battery charge indicator in the power on/off button flashes and
the handle beeps twice to indicate that the toothbrush is charging.
Battery low
If the battery charge of your Sonicare is low, you hear three beeps
and the battery charge indicator flashes rapidly for 1 minute after the
brushing cycle.
Battery fully charged
When the Sonicare is fully charged, the battery charge indicator stops
flashing and remains on for 10 seconds before it turns off.
To keep the battery fully charged at all times, you may keep your
Sonicare on the charger when not in use. It takes at least 24 hours to
fully charge the battery.
Note: When the battery charge is depleted, the handle will emit 2 sets
of 5 beeps at the end of a brushing session or when a new brushing
session is attempted. The new brushing session does not begin. The
green LED will also flash fast until the handle goes to sleep.
Bluetooth connectivity
Before you start the connectivity procedure, make sure your mobile
device runs on Bluetooth 4.0 or higher.
Note: For the latest information on device compatibility, please
visit the App Store or Google Play.
Connecting your toothbrush
1
Download the Philips Sonicare For Kids app from the App Store or
Google Play.
2 Confirm Bluetooth is switched on on your mobile device before
you open the app. Check the settings on your mobile device to
turn on Bluetooth.
12
English