Philips Sonicare FlexCare HX6911/50, Manual

Page: 15 / 132

Sanitising
Sanitising
- With the UV sanitiser you can clean your brush head after every use
(Fig. 8).
Unplug the sanitiser, discontinue use and call Consumer Care if
:
- The UV light bulb remains on when the door is open.
- The window is broken or missing from the sanitiser.
- The sanitiser gives off smoke or a burning smell while it is operating.
Note: UV light can be harmful to the human eye and skin. Keep the sanitiser
out of reach of children at all times.
1 After brushing, rinse the brush head and shake off excess water.
Do not place the travel cap on the brush head during sanitisation.
2 Place your finger in the door recess on top of the sanitiser and pull
open the door (Fig. 9).
3 Place the brush head on one of the 2 pegs in the sanitiser with the
bristles facing the light bulb. (Fig. 10)
Note: Only clean Sonicare snap-on brush heads in the sanitiser.
Note: The Sonicare for Kids brush head wears and degrades in the UV
sanitiser. You have to check and replace your child’s brush more frequently
than regular Sonicare brush heads (See chapter ‘Replacement’).
4 Make sure the sanitiser is plugged into a wall socket.
5 Close the door and press the green power on/off button once to
select the UV clean cycle.
Note: You can only switch on the sanitiser if the door is properly closed.
Note: The sanitiser stops if you open the door during the sanitising cycle.
Note: The sanitiser cycle runs for 10 minutes and then automatically switches off.
,
The sanitiser is in operation when the light glows through the
window.
ENGLISH
15