Maintenance
– If the headphone will not be used for a longer time,
please remove the batteries to prevent leakage and
corrosion.
– Only replace the batteries with R03/AAA NiMH
batteries (preferably Philips).
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter. Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
Troubleshooting
Specifications
Hearing Safety!
Continuous use at a high volume may permanently
damage your hearing.
9
English
System:
Infra Red (IR)
Modulation:
Frequency Modulation (FM)
Effective Transmission Range:
7 meters max. range (depending on ambient conditions
and restricted to line of sight with relation to the
transmitter)
Input level:
300 mVrms (1 kHz sine wave)
Power supply – transmitter:
12Volt / 200 mA DC, centre positive
Power supply – headphone:
2 x 1.2 V R03 (AAA) batteries (NiMH)
Carrier Frequency
(Headphone):
2.3 Mhz (L), 2.8 Mhz (R)
Signal/Noise ratio:
> 55 dB (1 kHz sine wave , A-weighted)
Distortion:
< 1% THD
Channel separation:
> 30 dB
SHC2000_booklet 12-01-2006 11:05 Pagina 9
