3
English
EN
Notice for Canada
Operation is subject to the following two conditions:
a
This device may not cause interference3 and
b
This device must accept any interference, including
interference that may cause undesired operation of the
device. The term “IC:” before the certification / registration
number only signifies that registration was performed based
on a Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not imply
that Industry Canada approved the equipment.
Trademarks
Trademarks are the property of Koninklijke Philips Electronics N.V.
or their respective owners. The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc. and any use of such marks by
Koninklijke Philips Electronics N.V. is under license.
Notice for the European Union
Hereby, Philips Consumer Lifestyle, BG Accessories, declares that this
Philips Bluetooth headset SHB6000 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
This product has been designed, tested and manufactured according
to the European R&TTE Directive 1999/5/EC.
Notice for USA (FCC)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Relocate the receiving antenna.
•
Increase the separation between equipment and receiver.
•
Connect the equipment into an outlet on a circuit different
•
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
•
help.
Warning
Changes or modifications made to this equipment not expressly
•
approved by Philips may void the FCC authorization to operate this
equipment.
Note
FCC/IC Radiation Exposure Statement: This equipment complies
•
with FCC/IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction
•
with any other antenna or transmitter.
Philips Consumer Lifestyle
A division of Philips Electronics North America Corporation
P.O.Box 10313
Stamford, CT 06904
Phone: 1-888-PHILIPS (744-5477)
