Problem
Cause
Solution
Water leaks
from the coffee
machine.
You have not closed the
lid properly.
Close the lid properly and lock the lever.
You overfilled the water
reservoir.
Do not fill the water reservoir beyond MAX
level.
The sieve in the centre
of the pod holder may
be clogged.
Check the pod holder. If the sieve is clogged, use
a washing-up brush to unclog the sieve. If you
cannot clean it properly with the washing-up
brush, put the pod holder in the machine and
descale the machine (see chapter ‘Descaling’).
The sealing ring may be
stuck under the edge of
the distribution disc.
Check if the sealing ring is stuck under the edge
of the distribution disc. If it is, pull it out from
under the distribution disc carefully.
The machine has been
stored in a room that
was not frost-free.
Contact the Philips Consumer Care Centre in
your country
Water drops on the
worktop may be the
result of placing the
water reservoir or
removing and removing
used pod(s).
Check if the water drops on the worktop
are not the result of placing or removing the
water reservoir or removing used coffee pods.
Make sure that you do not remove the water
reservoir when the coffee machine is heating up.
This may cause water that normally ends up in
the water reservoir to leak out of the machine.
In all other cases, contact the Philips Consumer
Care Centre in your country.
DEUTSCH
Einführung
Herzlichen Glückwunsch zu Ihrem Kauf und willkommen bei Philips! Um die Unterstützung von Philips
optimal nutzen zu können, registrieren Sie Ihr Produkt bitte unter
www.philips.com/welcome
.
Mit SENSEO
®
können Sie sich jederzeit eine perfekte Tasse Kaffee mit feiner Crema zubereiten.
Jede Tasse wird frisch gebrüht, sodass Ihr Kaffee stets ein ausgewogenes und volles Aroma
entfalten kann. Das SENSEO
®
System verbindet ein von Philips speziell entwickeltes Brühverfahren
mit portionsgerechten Kaffeepads, die mit fein gemahlenem Kaffee gefüllt und in verschiedenen
Röststufen und Geschmacksrichtungen erhältlich sind. Dieses perfekte Zusammenspiel garantiert
Ihnen einen optimalen Kaffeegenuss.
Kaffee in praktischen SENSEO
®
Kaffeepads und das einzigartige SENSEO
®
Brühsystem von Philips
sind perfekt aufeinander abgestimmt, sodass sich das volle Aroma des Kaffees entfalten kann.
Für einen optimalen Kaffeegeschmack beachten Sie bitte die folgenden Anmerkungen:
Sauberes kaltes Wasser
Verwenden Sie täglich sauberes kaltes Wasser. Wenn die Kaffeemaschine drei Tage lang nicht in
Gebrauch war, lassen Sie vor dem nächsten Aufbrühen sauberes kaltes Wasser durchlaufen
(siehe Abschnitt “Spülen” im Kapitel “Reinigung”).
Frische Kaffeepads
Verwenden Sie die speziell für Ihre SENSEO
®
Kaffeepadmaschine entwickelten SENSEO
®
Kaffeepads für ein weiches, volles Aroma. Die SENSEO
®
Kaffeepads bleiben länger frisch, wenn Sie
sie in einem Behälter aufbewahren.
Ein sauberes Gerät
Reinigen und entkalken Sie Ihre SENSEO
®
Kaffeepadmaschine regelmäßig (siehe Kapitel “Reinigung”
und “Entkalken”). Entfernen Sie gebrauchte Kaffeepads nach dem Brühen. Haben Sie ein Pad in der
Kaffeepadmaschine gelassen und diese eine Zeit lang nicht benutzt, sollten Sie das Gerät vor dem
erneuten Gebrauch einmal durchspülen (siehe Abschnitt “Spülen” im Kapitel “Reinigung”).
Weitere Informationen über die Wichtigkeit des Entkalkens, Anweisungen zum Entkalken oder
den richtigen Entkalker finden Sie auf unserer Website www.philips.com/descale-senseo.
Allgemeine Beschreibung (Abb. 1)
1 Wasserbehälter
2 Padhalter für 1 Tasse
°
3 Padhalter für 2 Tassen
°°
4 Abdeckung des Kaffeeauslaufs
5 Kaffeeauslauf
6 Tassentablett
7 Abtropfschale
8 Betriebsanzeige
9 Auslaufventil
10 Dichtungsring
11 Sprühkopf
Wichtig
Lesen Sie diese Bedienungsanleitung vor dem
Gebrauch der Maschine aufmerksam durch, und
bewahren Sie sie für eine spätere Verwendung auf.
Gefahr
- Tauchen Sie die Maschine niemals in Wasser oder
andere Flüssigkeiten.
Frost-free storage
If the coffee machine has already been used and therefore has been flushed with water,
it may only be used and stored in a frost-free place to prevent it from becoming damaged.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service
or go to your
Philips dealer. You can also contact the Philips Consumer Care Centre in your country
(see the worldwide guarantee leaflet for contact details).
Recycling
-
This symbol means that this product shall not be disposed of with normal household waste
(2012/19/EU) (Fig. 23).
-
Follow your country’s rules for the separate collection of electrical and electronic products.
Correct disposal helps prevent negative consequences for the environment and human health.
Guarantee and support
If you need information or support, please visit
www.philips.com/support
or read the
separate worldwide guarantee leaflet.
The purchase of the Philips SENSEO
®
coffee machine does not exhaust any of the rights of
Jacobs Douwe Egberts or Philips under any of their patents nor does it confer upon the
purchaser a licence under these patents.
Always return the machine to a service centre authorised by Philips for examination or repair.
Do not attempt to repair the machine yourself, otherwise your guarantee becomes invalid.
Troubleshooting
This chapter summarises the most common problems you could encounter with the machine.
If you are unable to solve the problem with the information below, visit
www.philips.com/support
for a list of frequently asked questions or contact the Consumer Care Centre in your country.
Problem
Cause
Solution
My coffee cup
overflows with
cold coffee.
You did not flush the
machine before first use.
Flush the machine before first use. When
the machine has emptied a complete water
reservoir, you can start to make a new coffee.
The indicator light
flashes slowly.
The machine is heating
up.
If this takes longer than two minutes, contact the
Philips Consumer Care Centre in your country.
The indicator
light flashes
quickly.
There is not enough
water in the water
reservoir.
Fill the water reservoir and make sure you
place the water reservoir properly into the
machine.
The float in the water
reservoir may be stuck.
Empty the water reservoir and shake it a few
times to release the float. Clean the water
reservoir with hot water and some washing-up
liquid or in the dishwasher.
If these solutions do not solve the problem,
contact the Philips consumer Care Centre in
your country.
The coffee is
not hot enough.
You have used the
machine for a longer
period without descaling.
Perform the descaling procedure as described
in chapter ‘Descaling’.
The coffee
temperature
in the cup
decreases
quickly.
Do not use cups that
are too large.
Use thin-walled cups. Thin-walled cups absorb
less heat from the coffee than thick-walled
cups.
You can preheat the coffee machine and cup
by brewing a cup of hot water first without
placing a coffee pod in the pod holder.
I cannot open
the lid.
A temporary vacuum
has developed under
the lid.
Switch off the coffee machine. Pull up the lever
and wait 24 hours before you open the lid. You
may need to use some force. Always make sure
the pod holders are clean and the sieve is not
clogged to prevent vacuum.
The coffee
machine
produces less
coffee than
before.
Perhaps the sieve in the
centre of the pod holder
is clogged.
If the sieve is clogged, use a washing-up brush to
unclog the sieve. If you cannot unclog it properly
with the washing-up brush, put the pod holder
in the machine and descale the machine. Descale
the machine (see chapter ‘Descaling’).
I cannot close
the lid properly.
Perhaps a used coffee
pod is sticking to the
water distribution disc.
If this is the case, remove the used pod.
The coffee
is not strong
enough.
You may not have
used the right number
of pods or may have
pressed the wrong
button.
Use 1 pod in combination with the 1-cup pod
holder and the 1-cup button. Use 2 pods in
combination with the 2-cup pod holder and
the 2-cup button.
The pod(s) may not
have been placed in the
pod holder properly.
Place the coffee pod(s) properly in the centre
of the pod holder, to prevent water from
escaping along the edge of the pod(s). When
you use two coffee pods on top of each other,
make sure that the convex sides of both pods
point downwards and press the pods lightly
into the pod holder. Make sure that the coffee
in the pod is distributed evenly.
You may have used the
same pod twice.
Place a new pod in the pod holder to brew a
fresh cup of coffee.
Perhaps you need a
different flavour.
If you prefer a more robust flavour, Senseo
®
coffee pods with a stronger blend are available.
The coffee is
too strong.
Perhaps you need a
different flavour.
If you prefer a milder flavour, Senseo
®
coffee
pods with a milder blend are available.
