WING WHITE LED WALL WASHER Operation Manual
Version 1: June 2011 ©2011 Philips Selecon All Rights Reserved
9of13
Control
The Wing White LED Wall Washer can be controlled using either manual control or DALI protocol.
Manual Dimming
A short push on the button represents the On/Off command.
Personal light levels can be set by a firm longer push on the push button.
Failure proof (non volatile) memory ensures that the driver always remembers your setting
when next time switched on or in case of power failure.
Maximum number of drivers is 28 luminaires connected in one circuit (switched on buy one or
multiple switches)
Ignore status, < 0.04 sec. To avoid reaction on mains spikes
Short push, between 0.04 sec and 0.5 sec. Switch On/Off
Long push, between 0.5 sec. and 10 sec. Dim Up/Down
Reset push, > 10 sec. Set light to mid value (35% output)
Notes:
1.
The dim direction will toggle after each individual push. Except when the value is lower than 10% it will
always dim up, and when the light output is higher than 70% it will always dim down to perform according human
perception
2.
First digital regulating steps (DALI) are fixed
at 1% light output (dimming specification)
DALI
The Digital Addressable Lighting Interface (DALI) is a digital protocol for controlling lighting components, such as
electronic ballasts and dimmers, in buildings.
Please refer to the diagram below for a typical DALI wiring configuration:
