Philips selecon plcyc1 MKII Installation & User Manual Download Page 5

Page: 5 / 32

About this Manual

PLCYC1 MKII LED Luminaire

Installation & User’s Manual

PREFACE

1. About this Manual

The document provides installation and operation instructions for the following products:

• PLCYC1 MKII LED Luminaire (PLCYC1MKII1-03-).

Please read all instructions before installing or using this product.

Retain this manual for future reference

. Additional

product information and descriptions may be downloaded at www.seleconlight.com

Note:

All PLCYC1 MKII LED Luminaires are universal voltage (100VAC to 240VAC, Auto-ranging).

2. Accessories

Contact your Authorized Philips Selecon Dealer for price and availability of all accessories for PLCYC1 MKII LED
Luminaires. Additional information can be found on the Philips Selecon web site at www.seleconlight.com.

PLCYC1 MKII LED Luminaire Power Input Cables

PLCYC1 MKII LED Luminaire Clamps

PLCYC1 MKII LED Luminaire USB Luminaire Software Cable

Part Number

Description

PC1BE

PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without
Connector (user to supply AC connector)

PC1GP

PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin
Connector

PC1GTL

PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock
Connector

PC1GR

PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison
Connector

PC3PC

PLCYC1 MKII LED Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for
interconnection between units

Part Number

Description

Selecon Molded Yoke rated C-Clamp

Mega Claw, Black Anodized

Part Number

Description

PEGASUS

USB Luminaire Software Programming Kit (for updating luminaire firmware) - includes USB Upload
Cable, QuickStart Guide, and Carry Bag

Summary of Contents for selecon plcyc1 MKII

































Search results

Summary of Contents for selecon plcyc1 MKII

Reviews:

Brands by name

Popular brands

Philips selecon plcyc1 MKII, Installation & User Manual

Search results

Summary of Contents for selecon plcyc1 MKII

Reviews:

Brands by name

Popular brands