background image

1

2

3

4

>75% recycled paper

>75% papier recyclé

www.philips.com

English

Know these safety symbols

- This “bolt of lightning” indicates uninsulated material within your

unit may cause an electrical shock. For the safety of everyone in
your household, please do not remove product covering. (Fig. 1)

- The exclamation mark calls attention to features that require you to

read the enclosed user information closely to prevent operating and
maintenance problems (Fig. 2).

Warning: To reduce the risk of fire or electric shock, this

appliance should not be exposed to rain or moisture and

objects filled with liquids, such as vases, should not be

placed on this appliance.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this appliance near water.
6 Do not use the product while you are in a bathtub, shower or pool.

Immersion of the product in water could cause an electrical shock.

7 Clean only with dry cloth.
8 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

9 Do not install near any heat sources such as radiators, heat registers,

stoves or other appliance (including amplifiers) that produce heat.

10 Installed batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

11 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where
they exit from the appliance.

12 Only use attachments/accessories specified by the manufacturer.
13 Use this appliance only for its intended use as described in this

manual.

14 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

15 Unplug this appliance during lightning or when unused for long

periods of time.

16 Unplug the product immediately and do not use it if the adapter, the

cord or the product itself is damaged.

17 Refer all servicing to qualified service personnel. Servicing is

required when the appliance has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the appliance, the appliance has been
exposed to rain or moisture, does not operate normally, or has been
dropped. Please check the power cord periodically to prevent
potential damages, such as worn or cut cord. For assistance, visit our
website 

www.philips.com/ support

 or contact the Philips Consumer Care

Center in your country.You find its contact details in the worldwide
guarantee leaflet.

18 Keep screws and small items out of the reach of the baby.
19 All the required markings are located on the bottom of the

appliance and on the adapter.

WARNING: STRANGULATION HAZARD. Children have

STRANGLED in cords. Keep this cord out of the reach of

children (more than 3.5 feet (1 meter) away). Do not remove

the tag (Fig. 3).

Caution

Caution: Prevent risk of explosion, electric shock, short circuit, or leakage

- The appliance shall not be exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall be placed on the
appliance.

- To prevent electric shock, do not open the housing of the product.
- Where the power plug is used as the disconnect appliance, the

disconnect appliance shall remain readily operable.

- The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

- Use the supplied adapter to connect the appliance to the power

outlet.

- If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

© 2016 Koninklijke Philips N.V.
All rights reserved
Philips Consumer Lifestyle BV
Tussendiepen 4, 9206AD Drachten, Netherlands
4213.355.5062.1 (1/2016)

Summary of Contents for SCD630/37
















Reviews: