Problem
Possible cause
Solution
No sound on parent unit. Volume off or too low.
Turn VOLUME control (B-9) on
parent unit downwards.
Units out of range.
Move parent unit closer to baby
unit.
No connection
Units are set to different
Set channel selection switches
between units.
channels.
(A-7, B-10) to the same position
on both units.
Parent unit out of range of
Move parent unit closer
tansmitted signal.
to baby unit.
Battery pack does
Battery life at an end.
Replace battery pack (B-13) of
not charge.
parent unit.
Interference or poor
Mobile or cordless phone(s)
Move phone(s) away from
reception.
too close to baby monitor.
baby monitor.
Interference from other
Switch both units to another
baby monitors in the
channel using the channel
neighborhood.
selection switch (A-7, B-10).
Battery power running low.
Recharge battery pack in time.
Transmitted signal is out of
Move parent unit closer
range; e.g. there are too many
to baby unit.
walls and/or ceilings between
baby unit and parent unit.
Parent unit located too close
Move parent unit away
to a window and picking up
from window.
interfering signals from other
appliances.
LINK light (B-5)
Units are out of range.
Move units closer together.
flashing red / LINK
alarm (B-11) beeps.
Interference from another
Switch to a different channel
baby monitor.
(A-7, B-10).
Interference from another
Remove other FM source.
FM source.
EN
Troubleshooting
12
Summary of Contents for SCD465
Page 2: ...2 ...
