Talking back to comfort your baby
1 On the Parent Unit, press and hold the TALK button (24) until the DECT
SYSTEM LINK lights (3 and 15) of both units blink (green). Then talk
clearly into the loudspeaker grill.
> While the TALK button on the Parent Unit is being pressed, no sounds
from the Baby Unit can be heard on the loudspeaker of the Parent Unit.
2 Release the TALK button when finished or when you wish to hear your
baby again.
Explanation of features
Monitoring baby silently
• Adjust the volume of the Parent Unit to the lowest level, using the
buttons (13).
> The sound-level lights (25) visually alert you to baby’s sounds.
The more sound your baby makes, the more lights light.
> When no sound is detected, all lights will be off.
> If the volume of the Parent Unit is set to Off, the Parent Unit will beep
as soon as the second sound-level-light (25) lights red.
Checking that the units have established a
connection
• Check that the DECT SYSTEM LINK light (15) on the Parent Unit lights
continuously (green) to confirm that the connection between both units
is reliable.
> When losing the link it will take about 8 seconds before the system link
led starts blinking. After another 30 seconds, the led blinks read and the
alarm sound is heard on the parent unit. When re-establishing the link it
takes maximally 30 seconds to confirm the link again.
+ –
+
ENGLISH
11
SC484_book.qxd 23-09-2004 17:51 Pagina 11
