Philips SalonStraight Essential HP4661/00, User Manual

Page: 6 / 100

6
introduction
The new Philips SalonStraight Essential has everything you need to get
the long-lasting straight results you want. The ceramic-coated plates
ensure ultra-smooth gliding through the hair, allowing you to style at high
temperatures in a quick and caring way.
general description (Fig. 1)
A
Ceramic-coated plates
B
Easy-lock system
C
Swivel cord
D
On/off switch with LED light
important
Read this user manual carefully before you use the appliance and save it
for future reference.
Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
Check the condition of the mains cord regularly. Do not use the
appliance if the plug, the cord or the appliance itself is damaged.
If the mains cord is damaged, it must be replaced by Philips, a service
centre authorised by Philips or similarly qualified persons in order to
avoid a hazard
Keep this appliance away from water. Do not use it near or over
water contained in baths, washbasins, sinks etc. When you use the
appliance in a bathroom, unplug it after use. The proximity of water
presents a risk, even when the appliance is switched off.
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
-
-
-
-
-
-
EnglisH