Philips Salon Multistylist HP4696, Manual

Page: 10 / 144

Waves
1 Connect the small curling attachment to the handle. Slide the slide-
on brush onto the curling attachment.
Take a lock of hair and wind it round the slide-on brush (Fig. 7).
Prevent the slide-on brush from getting tangled in the hair in the
following way:
Do not put too much hair in one lock.
Do not wind a lock of hair more than twice round the slide-on brush.
When you unwind a lock of hair, make sure that you hold the slide-on
brush away from the underlying hair.
Remove the slide-on brush from your hair after 5 to 10 seconds.
Let the waves cool down before you comb, brush or finger-comb
the hair into its final style.
Ringlets
1 Connect the large curling attachment to the handle. Slide the slide-
on spiral onto the curling attachment.
Take a lock of hair, press the lever to open the clip and place the
lock between the barrel and the clip (Fig. 8).
Release the lever and slide the barrel to the end of the lock. Then
wind the lock round the barrel following the spiral profile.
Note: Make sure that you wind the end of the lock in the required direction.
Open the clip after 5 to 10 seconds and remove the barrel from
the hair.
5 Let the ringlets cool down before you comb, brush or finger-comb
the hair into its final style.
Flicks
1 Connect the straightening attachment to the handle.
Slide the straightening plates into the attachment with the curved
sides pointing towards each other (Fig. 9).
-
-
-
EnglisH
10