Philips Saeco INCANTO HD8914, User Manual

Page: 13 / 76

-
Then the machine ready screen appears with the AquaClean %
icon to indicate that the filter has been installed.
Dispense cups . l of hot water to complete the activation. Discard
this water. To complete the activation, you have to perform both the hot
water circuit rinsing and coffee brewing circuit rinsing.
Manual rinsing cycle
During the manual rinsing cycle, fresh water flows through the water and
coffee brewing circuit. This takes a few minutes.
Hot water circuit rinsing
Place a container under the hot water/steam dispensing spout.
HOT WATER
HOT
WATER
Press the HOT WATER button.
-
The machine starts dispensing hot water.
Note: To interrupt the rinsing cycle, press the OK button.
When the machine has dispensed cups of hot water . l , press the
OK button to stop the hot water dispensing. Repeat steps to twice.
Coffee brewing circuit rinsing
Place a container under the coffee dispensing spout.
AROMA STRENGTH
GROUND COFFEE
Press the AROMA STREN6TH button and select the pre-ground coffee
brewing function.
Note: Do not add pre-ground coffee in the pre-ground coffee
compartment.
Press the ESPRESSO LUN6O button.
-
The machine starts dispensing water from the coffee dispensing
spout.
Wait until the machine stops dispensing water and empty the container.
Repeat steps to twice.
When the machine has returned to the main menu, empty the container.
The machine is ready for use.
AquaClean filter
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of Aquaclean filters as indicated in this
user manual, you don't have to descale your machine for
cups with a
capacity of ml .
Note: Your machine has to be completely limescale-free before you start to
use the AquaClean filter. If you did not activate the filter upon first use and
English