Cleaning the shaving unit
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1
Rinse the shaving unit under a hot tap for some time.
2
Pull open the three shaving heads one by one.
3
Rinse all three shaving heads and all three hair chambers under a hot
tap for 30 seconds.
Note: You can also brush the shaving heads and hair chambers with the
cleaning brush supplied.
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
4
Carefully shake off excess water and leave the shaving heads open to
let the shaving unit dry completely.
Never dry the shaving unit with a towel or tissue, as this may damage the
shaving heads.
Cleaning the shaving unit in the Jet Clean system (RQ1295CC,
RQ1257CC only)
The Jet Clean System comes in two types:
- Type RQ1008 (RQ1295CC only) has three cleaning programs: the eco
program, the auto program and the intensive program. Press the up/
down button to select the cleaning program you prefer.
Note: The eco program has a shorter drying time, to save energy. The intensive
program is a more thorough cleaning program.
C
F
RQ1008
- Type RQ1007 (RQ1257CC only) has one automatic cleaning program.
When you press the on/off button, the Jet Clean System starts cleaning
in the automatic cleaning program.
Preparing the Jet Clean system for use
Fill the cleaning chamber before fi rst use.
1
Put the small plug in the Jet Clean System.
2
Put the adapter in the wall socket.
The holder automatically moves to the highest position.
,
3
Simultaneously press the release buttons on both sides of the
cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2).
The cleaning chamber remains behind.
,
4
Unscrew the cap from the bottle with HQ200 cleaning fl uid.
5
Fill the cleaning chamber with HQ200 cleaning fl uid to a level
between the two lines.
6
Place the Jet Clean System back onto the cleaning chamber.
Make sure the release buttons click back into place.
Using the Jet Clean system
Note: If you use the shaver with shaving foam or shaving gel, we advise you
to rinse it under the hot tap before you clean it in the Jet Clean System. This
guarantees an optimal lifetime for the cleaning fl uid.
1
Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
RQ1007
2
1
English
English
