Philips RQ11XX, Important Information Booklet

Page: 5 / 100

- Use, charge and store the appliances at a temperature between
5°C and 35°C.
- Only use the accessories supplied.
- Always check the appliances and accessories before you use them.
Do not use the appliances or any of their parts if they are damaged,
as this may cause injury. Replace damaged parts by the original type.
- Water may leak from the socket at the bottom of the shaver when
you rinse it. This is normal and not dangerous because all electronics
are enclosed in a sealed power unit inside the shaver.
- RQ12xx series: Noise level: Lc = 65 dB [A]
- RQ11xx series: Noise level: Lc = 67 dB [A]
Beard Styler attachment (specific types only)
caution
- Only use the Beard Styler attachment to trim facial hair (beard,
moustache and sideburns). Do not use it to trim body parts below
the neckline.
- Only use the Beard Styler attachment in combination with the
following shaver types: RQ12xx,RQ11xx, RQ10xx.
- The Beard Styler attachment is not dishwasher-proof.
- Do not use the Beard Styler attachment if it is damaged.
Jet clean system (specific types only)
caution
- Never immerse the Jet Clean System in water.
- Only use the Jet Clean System with the original HQ200 cleaning fluid.
- Always place the Jet Clean System on a stable, level and horizontal
surface to prevent leakage.
- Empty the cleaning chamber and clean it thoroughly by rinsing it with
hot tap water every 15 days.
- The Jet Clean System thoroughly cleans but does not disinfect your
shaver, therefore do not share the shaver with others.
- The cleaning chamber of the Jet Clean System is not dishwasher-
proof.
- When the Jet Clean System is ready for use, do not move it to
prevent leakage of cleaning fluid.
EnglIsh
5