Important safety instructions
Know these
safety
symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The caution marking is located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the apparatus.
The symbol for CLASS II or double insulated electrical apparatus.
This apparatus has been designed in such a way that it does not require a
safety connection to electrical earth.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture. Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
For fastest support visit us online for chat and self service
solutions at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
•
Manufacturers, retailers and the rest of the consumer electronics industry are
committed to making home entertainment safe and enjoyable.
•
As you enjoy your television, please note that all televisions – new and
old- must be supported on proper stands or installed according to the
manufacturer’s recommendations. Televisions that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.
TUNE IN TO SAFETY
•
ALWAYS
follow the manufacturer’s recommendations for the safe
installation of your television.
•
ALWAYS
read and follow all instructions for proper use of your television.
•
NEVER
allow children to climb on or play on the television or the furniture
on which the television is placed.
•
NEVER
place the television on furniture that can easily be used as steps, such
as a chest of drawers.
•
ALWAYS
install the television where it cannot be pushed, pulled over or
knocked down.
•
ALWAYS
route cords and cables connected to the television so that they
cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
•
ALWAYS
contact your retailer about professional installation if you have any
doubts about your ability to safely mount your television.
•
ALWAYS
use a mount that has been recommended by the television
manufacturer and has a safety certification by an independent laboratory
(such as UL, CSA, ETL).
•
ALWAYS
follow all instructions supplied by the television and mount
manufacturers.
•
ALWAYS
make sure that the wall or ceiling where you are mounting the
television is appropriate. Some mounts are not designed to be mounted to
walls and ceilings with steel studs or cinder block construction. If you are
unsure, contact a professional installer.
•
Televisions can be heavy. A minimum of two people is required for a wall or
ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
•
Many new television buyers move their older CRT televisions into a
secondary room after the purchase of a flat-panel television. Special care
should be made in the placement of older CRT televisions.
•
ALWAYS
place your older CRT television on furniture that is sturdy and
appropriate for its size and weight.
•
NEVER
place your older CRT television on a dresser where children may be
tempted to use the drawers to climb.
•
ALWAYS
make sure your older CRT television does not hang over the edge
of your furniture.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart / apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s attention to
Article 820 of the NEC, ANSI/NFPA 70 and Section 54 of the CEC, Part I that
provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Example of antenna grounding as per NEC - National Electric Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
GROUND CLAMPS
If an outside antenna or cable system is connected to the product, be sure
the antenna or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810 of the NEC,
ANSI/NFPA 70 and Section 54 of CEC, Part I provides information with respect
to proper grounding of the mast and supporting structure, grounding of
the lead in wire to an antenna-discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Wall mount bracket kit
Brand
Model #
Screw dimension
32PFL6472/F7,
32PFL6452/F7,
32PFL6452/F7 D
SANUS
AST16
M4 x 1.378 ” (35 mm)
•
Your TV meets the VESA standard for wall mounting. Consult with your
local dealer for a wall mount bracket which is compatible with your TV
model.
•
The recommended wall mount bracket kit (sold separately) allows the
mounting of the TV on the wall.
•
For detailed information on installing the wall mount, refer to the wall
mount instruction book.
•
Funai Corporation is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV wall mount bracket
or mount the TV onto the bracket on your own.
•
The wall mount bracket must be installed by experts.
Funai Corporation is not liable for any accidents or injuries incurred while
installing this product, including but not limited to those noted below:
•
Install the wall mount bracket on a sturdy vertical wall.
•
If installed onto a ceiling or slanted wall, the TV and wall mount bracket
may fall which could result in a severe injury.
•
Do not use screws that are longer or shorter than their specified length. If
screws too long are used this may cause mechanical or electrical damage
inside the TV set. If screws too short are used this may cause the TV set
to fall.
•
Do not fasten the screws by excessive force. This may damage the product
or cause the product to fall, leading to an injury.
•
For safety reasons use 2 people to mount the TV onto a wall mounting
bracket.
•
Do not mount the TV onto the wall mounting bracket while your TV is
plugged in or turned on. It may result in an electrical shock injury.
