manualshive.com logo in svg

Philips RFX600099, User Manual

Share
Download
Philips RFX600099 User Manual Download Page 8

User Guide

8

Specifications

The specifications and design of this product are subject to change without notice.

Hardware 

Red LED (continuously on when powered, blinking during RF reception)

16 IDs and 4 CHs

4 outputs for IR emitters

Possibility to have multiple RF extenders in one home not interfering

Positioning: freestanding, mounted horizontally or hanging up side

down 

Dimensions 

4.5 x 3.2 x 1.2 inch (113 x 81 x 30 mm)  

Operating 

32°F to 122°F (0°C to 50°C) 

temperature  

Infrared (IR) 

Operating distance: up to 16 feet (5 meters)

IR frequency range: DC/flash codes, 36kHz-550kHz  

Radio 

Operating distance: up to 100 feet (30 meters)

frequency (RF)  

depending on the surrounding conditions

Frequency: 418 MHz (US)  

Dual IR emitters 

Number of IR emitters: up to 8 (4x2), emitters wired in series

3.5mm mono mini-plug

Cable length: 10 feet (2.5 meters)

Max. range: 3 feet (75 cm)  

Accessories 

120V AC Power adapter (400mA/12V DC adapter, UL-approved)

Mounting kit (Plate and 4 screws)  

Approvals 

The device complies with part 15.19(a)(3) of the FCC Rules.

Operation is subject to the following two conditions: (1) this device 

may not cause harmful interference and (2) this device must accept

any interference received including interference that may cause 

undesired operation.

Philips Consumer Electronics Company, 

Knoxville, Tennessee 37914 – 1810 U.S.A.  

Specifications

RFX6000 new  24-07-2002  14:04  Pagina 8

Summary of Contents for RFX600099









Reviews:

No comments

Brands by name

Popular brands

Load more brands