1 – Left button. Allows you to select display options or perform certain actions specified
on the screen.
2 – Up/down button. Allows you to navigate the display menu.
3 – Right button. Allows you to select display options or perform certain actions specified
on the screen.
4 – Start/stop button. Turns the device on or off.
5 – Manual switch. Activates the insufflation and exsufflation phases. Pressing switch to
the right (+) activates the insufflation phase. Pressing switch to the left (-) activates
the exsufflation phase. The center position activates the pause phase.
6 – Breathing circuit connection. Connect your circuit to this connector on the device.
7 – Display screen. Allows you to view settings and system status information.
A patient guide to CoughAssist T70
4
A patient guide to CoughAssist T70
5
Product features
7
1
5
6
2
1
7
8
9
2
10
6
5
4
3
3
4
1 – Fan exhaust. Air from inside the device is expelled here.
2 – AC power inlet. Connect the AC power cord here.
3 – Remote control connector. Connect the optional remote control accessory
(foot pedal) here.
4 – Connect a USB cable to this connector for service only.
5 – SpO
2
connector. If you are using the optional oximetry accessory,
connect it here.
6 – DC power inlet. Connect an external battery here using the Philips
Respironics DC power cord.
7 – Airpath outlet where air exits the device.
8 – Airpath inlet where outside air enters the device. Insert the filter supplied
with the device here.
9 – Detachable battery slot. Insert optional Lithium Ion detachable battery here.
10 – Tubing retainer. Route the tubing and mask through this bracket for proper
tubing management when the device is not in use.
