Philips PS32FHDER, User Manual

Page: 7 / 42

2. Monitor installation
2. MONITOR INSTALLATION
W
ARNING
:
Suf fi cient expertise is required to install this equipment. All devices and
complete setup must be tested before taking into operation.
W
ARNING
:
When the display is assembled in the medical system, take care of the fi xa-
tion of all cables, to avoid unwanted detachment.
W
ARNING
:
The monitor is not intended to be sterilized.
2.1 Installation procedure
Remove cable cover
To get access to the connectors, the cable cover should be removed.
1. Grab the middle bottom of the cable cover and pull it away from the monitor.
Image 2-1
Earth monitor
1. Optionally: For additional grounding, earth the monitor by connecting the protective earth pin to a
grounded outlet by means of a wire with at minimum AWG18 size (according to national Regulation re-
quirements regarding maximum admitted cable length). Use the included M4 screw to attach the wire
to the protective earth pin.
M4
Image 2-2
K5902107 (451920611682) PS32FHDER 20/03/2018 5