8
EN
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in
this chapter in sequence.
Unpack and install the
SoundSphere DesignLine
speakers
Caution
•
Unpack and install the tweeter poles in an open space.
•
Use both your hands and take care when you take the
speakers one by one out from the box.
1
In an open space, take the tweeter poles
out from the box, then take out the
speakers (in bags) with both hands.
2
Install the tweeter poles onto the speakers
with the supplied Allen wrench and screws.
Place the SoundSphere
DesignLine speakers
1
Place the speakers on the left and right
of your TV respectively based on the AC
outlet location.
2
If the main speaker is on the left of the TV,
slide
SWAP L/R
on the back of the main
speaker to the left position.
•
If the main speaker is on the right of
the TV, slide
SWAP L/R
to the right
position.
2
