Getting the Maximum out of it
30
Restoring devices, macro groups or timer groups
1
Make sure the device tab or macro tab is active.
The device or macro tab is active when the name of a device, macro or timer
is displayed.
2
Switch to Add mode via the Mode button
.
3
Tap Restore Deleted Device or Restore Deleted Group.
The deleted devices, macro groups or timer groups become visible.
4
Tap the item you want to restore.
The item is restored and you return to Use mode.
Note
Only the macro group or timer group itself is restored, not the macros or
timers it contained. You will have to record the macros and set the timers
again in Edit mode.
Recording Macros and Setting Timers
A macro allows you to send a sequence of IR commands using one single button.
With a timer you can activate a device at the time you prefer. See page 32 to do
this.
Note
To record a macro or to set a timer, there must be at least one macro group or
timer group in the Macro menu. To create these groups, see page 32.
Recording macros
1
Tap the Macro menu button
.
2
Open the macro menu and select a macro group.
3
Switch to Edit mode via the Mode button
.
Empty macro buttons appear in the macro control panel.
4
Tap the button you want to use for your macro.
