Philips Pronto TSU 2000 User Manual Download Page 19

Page: 19 / 52

Getting Started

Second setup panel

Setting

Function

Adjusting

Level

Turns the backlight always on

or off when activating the

touch screen.

Note:

When you choose

always off, you can only

activate the backlight using

the backlight button.

Always on: Tap the Level

button and position the

indicator in the left half of the

indication bar using the Left

button.

Always off: Tap the Level

button and position the

indicator in the right half of

the indication bar using the

Right button.

Mode Menu

Hides or shows the Mode

button.

Tap the Mode Menu button.

Touch

Adjusts or turns off the touch

screen beep.

Tap the Touch button

repeatedly.

Button

Adjusts or turns off the beep

of Left/Right and direct-access

buttons.

Tap the Button button

repeatedly.

Calibrate

Calibrates the touch screen.

Tap the Calibrate button and

follow the on-screen

instructions.

Revert

Reverts the Remote Control to

the factory default

configuration.

Tap the Revert button and

follow the on-screen

instructions.

Third setup panel

This panel provides technical information about your Remote Control.

To exit Setup Mode

Tap the Setup label on the Remote Control icon.

The Remote Control returns to Use mode.

Summary of Contents for Pronto TSU 2000





















































Search results

Summary of Contents for Pronto TSU 2000

Reviews:

Related manuals for Pronto TSU 2000

Brands by name

Popular brands

Philips Pronto TSU 2000, User Manual

Search results

Summary of Contents for Pronto TSU 2000

Reviews:

Related manuals for Pronto TSU 2000

Brands by name

Popular brands