background image

16-Bit Mode

21

PLPROFILE1 MKII LED Luminaires

Installation & User’s Manual

DMX CONTROL

This section contains information for operating the luminaire using DMX control in 16-Bit, 8-Bit, or 3-Channel (3-
Chan) modes. For Menu options and detailed information, see 

"Settings" on page 19

.

Note:  

These tables assume a DMX start address of 1. When a different starting address is used, this address becomes 

channel 1 function and other functions follow in sequence.

1. 16-Bit Mode

Table 3 provides DMX channel mapping of all DMX512 control values when the PLPROFILE1 MKII LED 
Luminaire is in 16-bit DMX512 mode (as set by the luminaire’s menu system).

Table 3: 

PLPROFILE1 MKII LED Luminaire DMX Channel Mapping (16-Bit Mode)

DMX 

Channel

Parameter

Range DMX

Range%

Default 

recommended 

console default 

values

Description

1

Intensity - High

0 - 65535

0 - 100%

0

16-bit control for Intensity of LED settings.

2

Intensity - Low

3

Red - High Byte

0 - 65535

0 - 100%

0

16-bit control of Red LEDs from 0 to full.

4

Red - Low Byte

5

Green - High Byte

0 - 65535

0 - 100%

0

16-bit control of Green LEDs from 0 to full.

6

Green - Low Byte

7

Blue - High Byte

0 - 65535

0 - 100%

0

16-bit control of Blue LEDs from 0 to full.

8

Blue - Low Byte

9

White - High Byte

0 - 65535

0 - 100%

0

16-bit control of White LEDs from 0 to full.

10

White - Low Byte

11

Preset Color Selection

0 - 255

0 - 100%

0

Used to access presets stored in fixture 
firmware, such as CCT presets, defined gel 
presets, etc. 

No Preset Activated = DMX 0-3 

(default)

Color Preset 0 (Off) = DMX 4 - 7
Color Preset 1 (Scratch Pad) = DMX 8 - 11
Color Preset 2 (Warm White) = DMX 12 - 15
Color Preset 3 (Cool White) = DMX 16 - 19
Color Preset 4 (Daylight) = DMX 20 - 23
Color Preset 5 (Arc White) = DMX 24 - 27
Color Preset 6 (Red) = DMX 28 - 31
Color Preset 7 (Yellow) = DMX 32 - 35
Color Preset 8 (Daylight Blue) = DMX 36 - 39
Color Preset 9 (Magenta) = DMX 40 - 43
Color Preset 10 (Aqua) = DMX 44 - 47
Color Preset 11 (Medium Amber) = DMX 48 - 51
Color Preset 12 (Lavender) = DMX 52 - 55
Color Preset 13 (Blue) = DMX 56 - 59
Color Preset 14 (Light Pink) = DMX 60 - 63
Color Preset 15 (Green) = DMX 64 -67
Color Preset 16 (Pink) = DMX 68 - 71
Color Preset 17 (Amber White) = DMX 72 - 75
Color Preset 18 (Dark Fuchsia) = DMX 76 - 79
Color Preset 19 (Light Amber) = DMX 80 - 83
Color Preset 20 (Steel Blue) = DMX 84 - 87
Color Preset 21 (Lt Green/Blue) = DMX 88 - 91
Color Preset 22 (Orange) = DMX 92 - 95
Color Preset 23 (Medium Pink) = DMX 96 - 99
Color Preset 24 (Cyan) = DMX 100 - 103
Color Preset 25 (Purple) = DMX 104 - 107
Color Preset 26 (Custom) = DMX 108 - 111
Color Preset 27 (Custom) = DMX 112 - 115
Color Preset 28 (Custom) = DMX 116 - 119
Color Preset 29 (Custom) = DMX 120 - 123
Color Preset 30 (Custom) = DMX 124 - 127
Color Preset 31 (Custom) = DMX 128 - 131
No Preset Activated = DMX 253 - 255

Summary of Contents for PLZS1MKII-1834-03









































Reviews: