Power Requirements
9
PLPROFILE4 LED Luminaires
Installation & User’s Manual
2. Power Requirements
WARNING!
The PLPROFILE4 LED Luminaire should be connected to a constant circuit or a relay device. It
should never be connected to a dimmer or circuit controlled by a dimmer.
The PLPROFILE4 LED Luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire contains
an auto-ranging power supply. Each luminaire can draw up to 600 Watts. Note, the values in
for reference only.
WARNING!
*These figures are based on the Maximum Allowable Input Current of 20 Amps (and the maximum
power supply limit of 600 Watts).
Do not overload circuits!
IMPORTANT AC POWER CONNECTION NOTES:
a. When using the daisy-chain connection method, ONLY connect
PLPROFILE4 LED Luminaires to AC Output Connection of
PLPROFILE4 LED Luminaires. DO NOT CONNECT OTHER TYPES
OF LUMINAIRES OR DEVICES!
b. Use only use approved cable types.
c. Do not overload circuits!
d. Do not connect PLPROFILE4 LED Luminaires to dimmed circuits.
e. The MAXIMUM allowable number of PLPROFILE4 LED Luminaires
which can be 'daisy-chained' on one power feed are listed in
above. DO NOT EXCEED!
Table 1: PLPROFILE4 LED Luminaire Voltage vs. Current
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
100
6.0
3
180
3.3
6
110
5.5
3
190
3.2
6
120
5.0
4
200
3.0
6
130
4.6
4
210
2.9
6
140
4.3
4
220
2.7
7
150
4.0
5
230
2.6
7
160
3.8
5
240
2.5
8
170
3.5
5
