Initial operation 11
Basic setup
Step 1: set up the language
1
Select
on the upper right of the home
screen, and press
OK
, then go to
Projector
Settings - Language/Input.
The following
Language & Input
menu appears. Use the
Navigation buttons
and
OK
on the remote
control to make changes.
•
Language
: Select your desired language for
on-screen menus.
•
Time Zone
: Select your time zone.
•
Keyboard Input Method
: Select
English
keyboard
or other input methods.
Step 2: activate on-screen
pointer
Activate the on-screen pointer (mouse cursor)
to replace the function of the
Navigation
buttons
on the remote control. The on-screen
pointer is useful when you input text through
pop-up virtual keyboard, browse the Internet,
or use some certain apps.
Before you can use the on-screen pointer, pair
the remote control with the projector.
1
Go to the Bluetooth settings interface.
Select
on the upper right of the home
screen, and press
OK
, then go to
Projector
Settings - Bluetooth On.
Enable Bluetooth
by selecting
Switch Bluetooth
if not
enabled.
2 Press and hold
OK
and
on the remote
control until the LED on the remote control
flashes red. Bluetooth on the remote
control is activated.
3 Select
Scan for devices
in the Bluetooth
settings interface to search for Bleutooth
devices available.
4 Select
Philips AirMote
from the Bluetooth
device list, and press
OK
. Then the remote
control is paired with the projector.
To use on-screen pointer
1
When the remote control is paired with the
projector, press on the remote control to
display or cancel the on-screen pointer.
2 When the pointer (angled arrow) is
displayed on the projection screen,
move the remote control in the air then
the pointer moves across the screen
correspondingly.
3 Press the button on the remote control
to confirm selection (the
OK
button is
disabled).
4 The on-screen pointer is disabled if you
press the
Navigation button
on the remote
control. To enable the on-screen pointer
again, press .
