Operation 7
4 Operation
Notice
You need to connect the projector to
an HDMI device, so that the projection
screen can show images (
see Connect,
page 6
).
Place the projector
Place the projector on a flat surface in front of
the projection surface.
You can also install the projector in different
configurations (
see Placement options, page
8
).
Connecting power supply
The projector can be operated by either
external power or built-in battery.
CAUTION!
Always use the button to turn the
projector on and off.
Operation by external power
1
Using the supplied USB cable, connect the
port on the projector to the USB port
on your computer or a power adapter (not
included).
a
b
Operation by built-in battery
The projector can be also operated on built-in
battery for portability.
Charging projector
Charge the projector for 1.5 hours before first
use.
Charge the projector when the low battery icon
appears in the center of the projection screen.
•
To charge the projector, connect the
projector to an external power supply as
described in the section of “Operation by
external power”.
•
When charging, the LED on the projector
turns red. When fully charged, the red LED
turns off.
Notice
The capacity of the built-in battery
diminishes with time. If the projector
functions only with external power
supply, the built-in battery is defective.
Contact an authorised service centre to
replace the built-in battery.
Power on and setup
1
Press and hold on the projector for
3 seconds to switch the projector on or off.
•
When the projector is switched on, the
LED on the projector turns blue if the
projector is not being charged.
•
When charging, the LED on the
projector turns red regardless of the
projector switching on and off.
Set up the language
1
When the projector is turned on, press
on the projector to access the settings
menu, then navigate to select
Language,
and press
OK
.
2 Press / to select a language.