Philips PET716, Service Manual

Page: 2 / 31

1.0 TECHNICAL SPECIFICATION
General
Dimensions (W x H x D): 210 x 178 x 39mm
Bear Unit Weight: 719.3g +/- 5%
Power supply: Input: 100-240V AC, 50/60Hz
0.3A
Output: DC 9V 1.0A
Power consumption: 9W
Operating temp. & RH: -10 ~ +50degC / 40-90%
Video System NTSC / PAL / AUTO
Audio System
Output voltage 1kHz: 2+/-0.2V
THD 20-20kHz (%): </=3%
Dynamic range: >/=70dB
Signal/Noise ratio: >/=70dB
Frequency response (20-
20kHz): +/-1dB
Channel Separation 1kHz >=60dB
Channel Balance 1kHz <2dB
Current consumption
DC-IN SUPPLY (9V)
Battery Charging Current 450 +/- 50mA
BATT. SUPPLY
Power Off
Playback with TFT on
Playback without TFT on
Playback time
Headphone out (headphone output load 2x16 ohm)
Maximum output power: 1.5mW
Frequency response: +/-1dB
SNR (A-wght): >70dB
THD (
0.2-20kHz)
: 1%
Left-Right Channel
Separation:
>/=50dB
Left-Right Channel
Balance: </=1dB
Supported disc type
Video Playback
Formats:
Audio Playback
Formats:
Playback disc type: DVD, Picture-CD,
SVCD, Video CD, MP3-
CD, CD-R/CD-RW,
WMA-CD, DVD-R, DVD-
RW, DVD+R, DVD+RW
Video Playback Format:
DVD / VCD / JPEG
Audio Playback Format:
CD/MP3, MP3-DVD,
WMA
Disc Diameter
12cm
Pixel specification
Max. 0 bright-dot & max. 3 dark-dots
Factory Service Mode (FSM)
To check the software version and change
region code of your DVD Portable
1. Power ON the DVD player and open the DVD
door
2. Press the “SETUP” button on remote control,
then select the “Preference MENU”
3. Press the remote button in the sequence as
9 -> 6 -> 5 -> 3
4.
The LCD display showed the existing region
code. Press
(navigation up) or
(navigation down) repeatedly to select the
number from 0 to 6.
5.
Refer below table for your region code setting
Select “0” setting = Region Free (confidential)