Philips PerfectCare Aqua GC8651, Service Manual

Page: 2 / 9

DISASSEMBLY ADVICE - IRON
GC8651
Light strip cap assy 1
Inlay and light strip assy 2
Reflector molded 3
LED microswitch holder assy 4
Trigger spring 5
Trigger molded 6
Mica plate 7
Plastic washer (1x) 8 (Front)
Decoration cap printed 9
Remove Screw A
Disassemble Light strip 1
Fig 1 Using "-" screw driver to lift up the
Inlay and release the catch at the end of
the handle
Fig 2 position of the catch to be applied
forces
Remove Screw B
Disassemble
Inlay and light strip assy
2
Disassemble Reflector molded 3
Remove Screw C
Disassemble
LED microswitch holder
assy 4
Disassemble Trigger spring 5
Disassemble Trigger molded 6
Remove Screw D
Disassemble Mica plate 7
Disassemble Plastic washer (1x) 8
Remove Screw E1 E2
Remove F
Disassemble
Decoration cap printed
9
Ryton ring 10
Deviator housing molded 11
Iron thermistor assy 12
Plstic washer (2x) 8 (Rear)
Hose cord mounted assy 14
Housing printed 15
Soleplate mounted assy 16
Remove Screw A
Disassemble Light strip 1
Remove
Screw B
Disassemble Inlay and light strip assy 2
Disassemble Reflector molded 3
Remove
Screw C
Remove Screw E1 E2
Remove Screw D
Disassemble Mica plate 7
Disassemble Plastic washer (1x) 8
Disassemble Ryton ring 10
Remove
Screw G1 G2 G3 G4
Disassemble
Deviator housing molded
11
Remove
Screw H
Disassemble Iron thermistor assy 12
Remove
Screw I1 I2
Disassemble Plastic washer (2x) 8
Disconnect
Wires
Release
hose clip (2x)
Remove
J
Disconnect Wires
Disassemble Hose cord mounted assy 14
Disassemble Housing printed 15
Disassemble Soleplate mounted assy 16