9
EN
English
4
Pressandhold
the key that does not
function and
immediately
release it when
the device responds.
• If the key still does not function as expected,
try pressing it again for a longer period of
time.
5
Press the
device
selection key
twice
to save your settings
and exit setup
mode.
•
When no key
is pressed for 5 minutes or more, the
remote control will exit setup mode,
automatically saving all your settings.
3 Using the universal
remote control
3.1 Keys and functions
The illustration on page 2 gives an overview of
all keys on the remote control. Try out the keys
you need for operating your devices.
Notes
•
Keys having the same functions as the
keys on your original remote control may
have different namings on the SRP2003
(e.g. Info / Display).
•
Only functions that are available on your
original remote control can be used for
operating your devices with the SRP2003.
1
.................................... Setup light.
• lights up red when the
remote control is in
setup mode.
• lights up red when
a remote control
command is being sent.
2
............................... selects available source
inputs (antenna, cable,
etc.).
3
.................. device selection keys.
Select the device to be
operated.
Using
the
univ
ersal
remote
contr
ol
2 x
SRP2003_27__Manual_80_210.indd 9
25-09-09 11:06
