4
EN
2
Getting started
2.1 Inserting the batteries
•
Insert 2 AAA type
batteries, noting the
+ and -
configuration in the
battery
compartment.
Note
When replacing the batteries, all user settings
will be retained in the remote control
memory for 5 minutes.
2.2 Testing the universal remote
control
It is advised to test whether your device(s)
already respond(s) to the SRP2003 before
setting it up (see chapter
2.3
). The example
below instructs you how to do this for your
TV. You can repeat the same steps for other
devices (DVD player/recorder and Cable/
Satellite box) which you want to operate using
the SRP2003.
Example: testing the universal remote control
on your TV:
1
Switch ON
your TV manually or use the
original remote control for this. Tune to
channel 1.
2
Press the
device selection key
to select TV.
• The red Setup
light lights up.
• If the light does not
light up, check whether the batteries are
properly inserted (see chapter
2.1
).
SRP2003_27__Manual_80_210.indd 4
25-09-09 11:06
