Philips PAN44, Manual

Page: 8 / 9

which could be SWITCH OFF
、
LAST SWITCH STATE
、
SWITCH ON. The
default setting is LAST SWITCH STATE.
3-6 Mode of switch off function:
When the mode of switch On/Off is set to 0, any command of switch off will be
disabled and the On/Off function of include button will be disabled. The default
setting is enable mode. When manual On/Off function is disabled, the RF com-
mand can only switch On but not Off. This is useful function for keeping the de-
vice in switch on state.
3-7 LED indication mode: The default setting is Show Switch State.
3-7-1 Show Switch State
：
When switch is on, LED is on. When switch is off,
LED is off.
3-7-2 Show Night mode
：
When switch is on, LED is off. When switch is off,
LED is on.
3-7-3 One Flash mode
：
When the state of switch changes, LED will be on
only one second, then LED keeps off.
3-8 Watt differential mode
：
The default setting is 1 (= 5%).
Whenever Watt value of PAN44 changes over 5% of last reading value, it will
send Meter report to the group 1 nodes. However, if Watt differential mode as
0, the unsolicited report will be disabled.
3-9
Switch status report mode:
The default setting is 1(Enable)
Whenever PAN44 manually switch on or off, it will send BINARY_SWITCH_
REPORT to the node of group1.
1.
Firmware update over the air (OTA)
PAN44 is based on 700 series SoC and supports Firmware Update Command
Class, it can receive the updated firmware image sent by controller via the Z-
wave RF media. It is a helpful and convenient way to improve some function if
needed.
2.
The Switch supports Command Classes including
Command Class Version Required Security Class
Z-Wave Plus Info 2 None
Security 0 1 None
Security 2 1 None
Supervision 1 None
Transport Service 2 None
Association 2 Highest granted Security Class
Association Group
Information
3
Highest granted Security Class
Basic 2 Highest granted Security Class
Binary Switch 2 Highest granted Security Class
Configuration 4 Highest granted Security Class
Device Reset Locally 1 Highest granted Security Class
Firmware Update Meta
Data
5
Highest granted Security Class
Indicator 3 Highest granted Security Class
Manufacturer Specific 2 Highest granted Security Class
Meter 5 Highest granted Security Class
Multi Channel Association 3 Highest granted Security Class
Notification 8 Highest granted Security Class
Powerlevel 1 Highest granted Security Class
Version 3 Highest granted Security Class